Mark and Focus analysis

How Brazil’s Water Reuse Standard Moves Projects Toward Contracts

Read the analysis
Industrial valve mounted on stainless steel piping
A valve and control assembly on industrial piping. jarmoluk / Pixabay · https://pixabay.com/service/license-summary/

Brazil’s sanitation regulator has published a reference standard for non-potable reuse of effluent from public sewerage. It sets out how local regulators and providers should choose projects to study, test demand and feasibility, and assign responsibilities in supply contracts.

Brazil’s National Water and Basic Sanitation Agency, ANA, published Reference Standard 17 through Resolution 309 on November 6. The resolution takes effect on January 4, 2027. It deals with the non-potable reuse of effluent from public sewerage services and sets out how a potential source of reclaimed water becomes a water reuse project that a local regulator can review. The agency approved a regulatory impact assessment and consultation draft in December 2025. The published standard starts with a decision about where to study reuse and continues into contracts that govern who supplies the water and on what terms.

Where a feasibility study begins

Subnational regulators select municipalities in coordination with sanitation service authorities and providers. The standard says to include municipalities in basins whose water resource plans or implementation programs already provide for non-potable reuse. It also allows inclusion where conditions warrant it, such as recurring scarcity, a basin with limited water available to dilute effluent, a treatment plant early in design, or potential customers close to a plant in operation or under expansion.

Each condition points to a different reason to study the opportunity. A plant still being designed gives the provider a chance to consider reuse when laying out treatment and connections. At an existing plant, the location of a customer helps determine whether distribution is affordable. The utility and regulator can gather evidence of demand through a call for expressions of interest, including likely volumes, quality requirements and delivery locations. The standard treats those responses as information for project development. A prospective user can express interest without committing to buy water.

What the supplier and buyer need to agree

The standard distinguishes supplying sewage effluent to someone who will produce reclaimed water from supplying the reclaimed water itself. The distinction determines where treatment and quality obligations sit. An industrial customer may be able to manage some treatment on its own premises, while another user may need water delivered to a specification suitable for immediate use. A feasibility study has to account for the proposed delivery arrangement because the same volume leaving the wastewater plant can require quite different investment and operating arrangements at the other end.

The intended use also helps define how the product is managed once it is delivered. The standard assigns users duties such as keeping records of volumes and destinations, reporting irregularities to the producer or distributor, and preventing cross-connections with potable water. Changing the class of use requires prior technical, environmental and public-health assessment and a contract amendment. This protects the link between the use for which a supply was agreed and the safeguards the participants have put in place.

How reuse enters utility oversight

The public sewerage service contract must expressly address possible revenue from selling or using effluent to produce reclaimed water, including any applicable sharing arrangement. Downstream supply contracts signed by the public sewerage provider have to fit the service contract’s treatment of revenue, accounting and disclosure. That connection gives a tariff regulator a way to see how reuse earnings relate to regulated operations and the use of existing assets.

A municipality can therefore be selected for a study even if its first project is still uncertain. The next decisions depend on who needs the water, what quality they need at the point of delivery and whether treatment, storage and transport can be supported by the expected volumes and terms. The standard puts those questions in the same process, so a promising source of effluent can be evaluated as a service that someone will need to operate and pay for.

Take-Out

The standard makes a willing customer only one part of the decision. A project also needs a viable supply route, an agreed quality standard and a contract that tells the regulator how revenue and operating responsibility are handled.

Questions and answers

What readers should know

When does Resolution 309 take effect?
The resolution specifies January 4, 2027.
What water does it address?
It concerns non-potable reuse of effluent from public sewerage services.
Who identifies municipalities for studies?
Subnational regulators select them in coordination with the authorities responsible for sanitation services and their providers.
Does an expression of interest commit a customer to buy?
The call is exploratory. It gathers information about possible demand and supply conditions.
Why do revenue provisions appear in the service contract?
They establish how reuse proceeds are to be treated and how the provider will account for and disclose them under applicable tariff regulation.

Further analysis

More from this desk

Connected analysis